- 非IC关键词
企业档案
- 相关证件：
- 会员类型：
- 会员年限：3年
- 李小姐
- 手机：13510546959
- 朱先生
- 手机：19065122659
- 阿库IM：
- 地址：深圳市福田区福田街道福山社区彩田路2010号中深花园B1008M15
- E-mail：1345529428@qq.com
产品分类
- ROM（只读存储器）(1)
- 整流二极管模块(1)
- 稳压二极管(1)
- 桥堆/整流桥/桥式整流器(1)
- 快/超快/特快恢复二极管(1)
- 单片机MCU(1)
- 贴片(片式/SMD)电容(1)
- 钽电解电容(1)
- 其他电阻(1)
- 其他类型电源(1)
- 摇头开关(1)
- 压差传感器(1)
- 放大器(2)
- LED器件(1)
- 模块式PLC(2)
- 其他(5)
询价相关产品
产品信息
L9349TR-LF:
Four low-side output driver with protection diagnostics designed as a conventional switch – 2 channels with 5 A output current capability and rON = 0.2 typ. – 2 channels with 3 A output current capability and rON = 0.3 typ. ■ Integrated 60 V Zener diodes output clamping structure ■ Output slope control ■ Short circuit protection ■ Open load detection in ON and OFF condition ■ Load bypass detection ■ Overload disable ■ Signal and power ground loss shutdown ■ Selective overtemperature shutdown ■ Electrostatic discharge (ESD) protection
Description The L9349 is a monolithic IC designed to drive inductive loads in low side configurations like hydraulic valves used in ABS systems. Particular care has been taken to protect the device against failures, to avoid electromagnetic interferences and to offer extensive real time diagnostics. The internal pull down current source at the ENable and INput pins assures, that the device is switched off, in case of open input conditions. An output voltage slope limitation is implemented to reduce the EMI.
L9349TR-LF
L9349TR-LF
L9349TR-LF
The device is equipped with an integrated Zener diodes clamp for fast inductive load current recirculation. This structure limits the output voltage during the recirculation phase to 50V. The device is self-protected against short circuit at the outputs and overtemperature. For the real time error diagnosis, the voltage and the current of the outputs are compared with internally fixed thresholds to recognize open load in OFF and ON conditions. The output voltages are also compared with each other in OFF condition with a fixed offset, in order to recognize load bypasses. If the over load current threshold is exceeded, the output current will be limited internally during the diagnostic overload delay switch-off time. All four channels are monitored with a status output. The diagnostic output level in connection with different enable and input conditions allows it to recognize the different fail states.
深圳市跃创芯科技有限公司，
只做原装，只有原装，可开票!
电话：18665359397
Q Q: 632886022